View RFVA0016_9141986.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 1 of 20 www.qorvo.com ? mcm, 32-pin, 5.2mm x 5.2mm general description qorvo's RFVA0016 is an integrated analog controlled variable gain amplifier for broadband applications with external matching to allow for configurations in different bands with a single module. it features exceptional linearity over a greater than 30db gain control range. this variable gain amplifier is controlled by a single 0v to 3.3v positive supply voltage when mode pin is 0v or 5v to 0v positive supply voltage when mode pin is 5v. the RFVA0016 is packaged in a small 5.2mm x 5.2mm leadless laminate mcm which contains thermal vias for ultra-low thermal resistance. this module is external matched to 50 ? at each individual band. product features ? frequency range 400mhz to 2810mhz ? mode pin to switch the attenuation slope ? gain = 25db typical ? gain control range = >30db ? acpr > -60dbc typical at ? +10dbm pout (dual carrier wcdma) ? small 5.2mm x 5.2mm, multi-chip module ? +5v supply ordering information part no. description RFVA0016sq sample bag with 25 pieces RFVA0016sr 7 reel with 100 pieces RFVA0016tr7 7 reel with 750 pieces RFVA0016tr13 13 reel with 250 0 pieces RFVA0016pck- 41 0 2110mhz to 2170mhz pcba with 5-piece sample bag applications ? cellular, 3g infrastructure ? wibro, wimax, lte ? microwave radio ? high linearity power control functional block diagram top view downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 2 of 20 www.qorvo.com ? absolute maximum ratings parameter rating supply voltage 5.5 v control voltage 5.5 v dc supply current 270 ma rf input +24 dbm operating junction temperature 17 0?c storage temperature - 40 to 150?c exceeding any one or a combination of the absolute maximu m rating conditions may cause permanent damage to the device. ext ended application of absolute maximum rating conditions to the devic e may reduce device reliability. recommended operating conditions parameter min typ max units operating temperature range - 40 + 105 c tj for >10 6 hours mttf +170 c electrical specifications are measured at specified test cond itions. specifications are not guaranteed over all recommended operating conditions. electrical specifications parameter conditions min typ max units 728mhz to 746mhz frequency band all specifications for 25 c, 5v, unless otherwise stated. gain 24 29 db adjustment range 30 35 db output ip3 max gain +41 db m output p1db max gain +25 dbm acpr dual carrier wcdma, 7.5db cf at nominal operating output power of +10dbm - 65 - 62 db c gain flatness over 50mhz bw 0.3 db control voltage mode pin = 0v 0 3.3 v noise figure min attenuator setting 5 db impedance 50 ? input return loss 18 db output return loss 12.5 db 2110 mhz to 2170 mhz frequency band all specifications for 25 c, 5v, unless otherwise stated. gain 24 26 db adjustment range 35 40 db output ip3 max gain +40 db m output p1db max gain +24 dbm acpr dual carrier wcdma, 7.5db cf at nominal operating output power of +10dbm - 65 - 62 db c gain flatness over 50mhz bw 0.3 db control voltage mode pin = 0v 0 3.3 v noise figure min attenuator setting 5 db impedance 50 ? input return loss 21 db output return loss 16 db downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 3 of 20 www.qorvo.com ? electrical specifications parameter conditions min typ max units 2620 mhz to 2690 mhz frequency band all specifications for 25 c, 5v, unless otherwise stated. gain 22 24 db adjustment range 37 45 db output ip3 max gain +40 db m output p1db max gain +24 dbm acpr dual carrier wcdma, 7.5db cf at nominal operating output power of +10dbm - 65 - 62 db c gain flatness over 50mhz bw 0.25 db control voltage mode pin = 0v 0 3.3 v noise figure min attenuator setting 4.9 db impedance 50 ? input return loss 21 db output return loss 18 db power supply all specifications for 25 c, 5v, unless otherwise stated. supply voltage 4.75 5 5.25 v gain control voltage mode pin = 0v 0 3.3 v mode pin = 5v 5 0 v current 140 185 218 ma thermal resistance (r th ) 57 ? c/w downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 4 of 20 www.qorvo.com ? typical performance C 724 mhz to 746mhz application circuit -10 -5 0 5 10 15 20 25 30 35 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 gain (db) voltage control (v) gain versus voltage control versus temperature at 737mhz -40c 25c 85c 0 5 10 15 20 25 30 35 40 0 0.5 1 1.5 2 2.5 3 3.5 attenuation (db) voltage control (v) attenuation versus voltage control versus temperature at 737m hz -40c 25c 85c 0 5 10 15 20 25 30 728 730 732 734 736 738 740 742 744 746 gain (db) frequency (mhz) gain versus frequency versus voltage control 0v 1v 1.4v 1.8v 2.2v 2.6v 0 5 10 15 20 25 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 input ip3 (dbm) voltage control (v) input ip3 versus voltage control versus temperature at 737mhz -40c 25c 85c 10 15 20 25 30 35 40 45 50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output ip3 (dbm) voltage control (v) output ip3 versus voltage control versus temperature at 737mhz -40c 25c 85c downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 5 of 20 www.qorvo.com ? typical performance C 724 mhz to 746mhz application circuit -40 -35 -30 -25 -20 -15 -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output return loss (db) voltage control (v) output return loss versus voltage control versus tempera ture at 735mhz -40c 25c 85c -40 -35 -30 -25 -20 -15 -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 input return loss (db) voltage control (v) input return loss versus voltage control versus temperat ure at 735mhz -40c 25c 85c -25 -20 -15 -10 -5 0 726 728 730 732 734 736 738 740 742 744 746 748 output return loss (db) frequency (mhz) output return loss versus frequency versus voltage control 0v 1v 1.4v 1.8v 2.2v -25 -20 -15 -10 -5 0 726 728 730 732 734 736 738 740 742 744 746 748 input return loss (db) frequency (mhz) input return loss versus frequency versus voltage control 0v 1v 1.4v 1.8v 2.2v 4 6 8 10 12 14 16 18 20 727 729 731 733 735 737 739 741 743 745 747 noise figure (db) frequency (mhz) noise figure versus frequency versus voltage control 0v 1v 1.4v 1.8v 2.2v 2.6v -70 -69 -68 -67 -66 -65 -64 -63 -62 -61 -60 -16.0 -15.0 -14.0 -13.0 -12.0 -11.0 -10.0 acpr (dbc) input power (dbm) acpr versus input power versus temperature, output power = + 10dbm -40c 25c 85c downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 6 of 20 www.qorvo.com ? typical performance C 2110 mhz to 2170mhz application circuit -20 -15 -10 -5 0 5 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 3.5 gain (db) voltage control (v) gain versus voltage control versus temperature at 2140mhz -40c +25c +85c +105c 0 5 10 15 20 25 30 35 40 45 0 0.5 1 1.5 2 2.5 3 3.5 attenuation (db) voltage control (v) attenuation versus voltage control versus temperatu re at 2140mhz -40c +25c +85c +105c -10 -5 0 5 10 15 20 25 30 2110 2120 2130 2140 2150 2160 2170 gain (db) frequency (mhz) gain versus frequency versus voltage control 0v 1.4v 2v 2.4v 2.8v 0 5 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 3.5 input ip3 (dbm) voltage control (v) input ip3 versus voltage control versus temperature at 2140mhz -40c +25c +85c +105c -5 0 5 10 15 20 25 30 35 40 45 0 0.5 1 1.5 2 2.5 3 3.5 output ip3 (dbm) voltage control (v) output ip3 versus voltage control versus temperature at 2140mh z -40c +25c +85c +105c downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 7 of 20 www.qorvo.com ? typical performance C 2110 mhz to 2170mhz application circuit -40 -35 -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 3.5 output return loss (db) voltage control (v) output return loss versus voltage control versus temperat ure at 2140mhz -40c 25c 85c 105c -40 -35 -30 -25 -20 -15 -10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 input return loss (db) voltage control (v) input return loss versus voltage control versus temperat ure at 2140mhz -40c 25c 85c 105c -25 -20 -15 -10 -5 0 2110 2120 2130 2140 2150 2160 2170 output return loss (db) frequency (mhz) output return loss versus frequency versus voltage control 0v 1.4v 2v 2.4v 2.8v -25 -20 -15 -10 -5 0 2110 2120 2130 2140 2150 2160 2170 input return loss (db) frequency (mhz) input return loss versus frequency versus voltage control 0v 1.4v 2v 2.4v 2.8v 4 6 8 10 12 14 16 18 20 22 2110 2120 2130 2140 2150 2160 2170 noise figure (db) frequency (mhz) noise figure versus frequency versus voltage control 0v 1.4v 2v 2.4v 2.6v -70 -65 -60 -55 -50 -17 -16 -15 -14 -13 -12 acpr (dbc) input power (dbm) acpr versus input power versus temperature at 2140m hz, output power = +10dbm -40c +25c +85c +105c lte 1ch 20mhz, adj ch ibw 18.02mhz, par 9.5db no clipping downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 8 of 20 www.qorvo.com ? typical performance C 2620 mhz to 2690mhz application circuit -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 gain (db) voltage control (v) gain versus voltage control versus temperature at 2650mhz -40c 25c 85c 0 5 10 15 20 25 30 35 40 45 50 55 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 attenuation (db) voltage control (v) attenuation versus voltage control versus temperatu re at 2650mhz -40c 25c 85c 0 5 10 15 20 25 2620 2630 2640 2650 2660 2670 2680 2690 gain (db) frequency (mhz) gain versus frequency versus voltage control 0v 1.2v 1.6v 2v 2.4v 0 5 10 15 20 25 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 input ip3 (dbm) voltage control (v) input ip3 versus voltage control versus temperature at 2650mhz -40c 25c 85c -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output ip3 (dbm) voltage control (v) output ip3 versus voltage control versus temperature at 2650mh z -40c 25c 85c downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 9 of 20 www.qorvo.com ? typical performance C 2620 mhz to 2690mhz application circuit -40 -35 -30 -25 -20 -15 -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output return loss (db) voltage control (v) output return loss versus voltage control versus temperat ure at 2650mhz -40c 25c 85c -40 -35 -30 -25 -20 -15 -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 input return loss (db) voltage control (v) input return loss versus voltage control versus temperat ure at 2650mhz -40c 25c 85c -30 -25 -20 -15 -10 -5 0 2615 2625 2635 2645 2655 2665 2675 2685 2695 output return loss (db) frequency (mhz) output return loss versus frequency versus voltage control 0v 1.2v 1.6v 2v 2.4v -30 -25 -20 -15 -10 -5 0 2620 2630 2640 2650 2660 2670 2680 2690 input return loss (db) frequency (mhz) input return loss versus frequency versus voltage control 0v 1.2v 1.6v 2v 2.4v 5 6 7 8 9 10 11 12 13 14 15 16 2620 2630 2640 2650 2660 2670 2680 2690 noise figure (db) frequency (mhz) noise figure versus frequency versus voltage control 0v 1.2v 1.6v 2v 2.4v -70 -69 -68 -67 -66 -65 -64 -63 -62 -61 -16.0 -15.5 -15.0 -14.5 -14.0 -13.5 -13.0 acpr (dbc) input power (dbm) acpr versus input power versus temperature at 2650m hz, output power = 10dbm -40c 25c 85c downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 10 of 20 www.qorvo.com ? evaluation board schematic C 728 mhz to 746mhz application circuit downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 11 of 20 www.qorvo.com ? evaluation board bill of materials (bom) C 728 mhz to 746 mhz application circuit reference des. value description manuf. part number va0016410(a) ddi va0016410(a) c1, c2, c15 0.1uf cap, 10%, 16v, x7r, 0402 murata electronics grm155r71c104ka88d c24 100pf cap, 5%, 50v, c0g, 0402 murata electronics grm1555c1h101ja01d c5, c6, c8 1000pf cap, 10%, 50v, x7r, 0402 murata electronics grm155r71h102ka01d c7 , c25 10pf cap, 5%, 50v, c0g, 0402 murata electronics grm1555c1h100jz01e c12, c28 c29 100pf cap, 5%, 25v, c0g, 0201 murata electronics grm0335c1e101jd01d c10 3.9pf cap, +/-0.25pf, 25v, c0g, 0201 murata electronics grm0335c1e3r9cd01e c19 12pf cap, 1%, 25v, c0g, 0201 murata electronics grm0335c1e120fd01e c21 4.2pf cap, +/-0.05pf, 25v, c0g, 0201 murata electronics grm0335c1e4r2wd01 l1 47nh ind, 5%, m/l, 0402 murata electronics lqg15hn47nj02d l5 2.2nh ind, +/-0.1nh, t/f, hi-q, 0201 murata electronics lqp03tn2n2b02d l12 10nh ind, 3%, t/f, hi-q, 0201 murata electronics lqp03tn10nh02d l2 6.2nh ind, 3%, t/f, hi-q, 0201 murata electronics lqp03tn6n2h02d r1 1.5k res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-152jpa15 r2 100 ohm res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-101jpa15 r3, r9, r12 0 ohm res, 0201 kamaya, inc rmc1/20jppa15 r10 2.2k res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-222jpa15 r16 0 ohm res, 0402 kamaya, inc rmc1/16sjpth j1, j2, j3, j4 conn, sma, end lnch, univ, hyb mnt, flt heilind electronics per mat- 21 - 1038 p1 conn, hdr, st, plrzd, 8-pin itw pancon mpss100-8-c c3, c4, c9, c11, c13 , c14, c16- c 18, c20, c22, c23, c26, c27, c30- c3 2, r4 - r 8, r11, r13-r15, l7, l9, l11, l13 dnp u1 dut qorvo RFVA0016 downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 12 of 20 www.qorvo.com ? evaluation board schematic C 2110 mhz to 2170mhz application circuit downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 13 of 20 www.qorvo.com ? evaluation board bill of materials C 2110 mhz to 2170 mhz application circuit reference des. value description manuf. part number va0016410(a) ddi va0016410(a) c1, c2, c15 0.1uf cap, 10%, 16v, x7r, 0402 murata electronics grm155r71c104ka8 8d c24 100pf cap, 5%, 50v, c0g, 0402 murata electronics grm1555c1h101ja0 1d c5, c6, c8 1000pf cap, 10%, 50v, x7r, 0402 murata electronics grm155r71h102ka0 1d c7 , c25 10pf cap, 5%, 50v, c0g, 0402 murata electronics grm1555c1h100jz01 e c12, c28 100pf cap, 5%, 25v, c0g, 0201 murata electronics grm0335c1e101jd0 1d c1 6 0.1pf cap, +/ -0.05pf, 25v, c0g, 0201 murata electronics grm0335c1er10wz0 1d c29, c10 2pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e2r0bd0 1d c9 1.5pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e1r5bd0 1e c19 2.1pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e2r1bd0 1e c21 2.2pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e2r2bd0 1d l1 27nh ind, 5%, m/l, 0402 murata electronics lqg15hn27nj02d l5 5.1nh ind, 3%, t/f, hi-q, 0201 murata electronics lqp03tn5n1h02d l12 0.6nh ind, +/-0.1nh, t/f, hi-q, 0201 murata electronics lqp03tn0n6b02d l2 1.8nh ind, +/-0.1nh, t/f, hi-q, 0201 murata electronics lqp03tn1n8b02d r1 1.5k res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-152jpa15 r2 100 ohm res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-101jpa15 r3, r9, r12 0 ohm res, 0201 kamaya, inc rmc1/20jppa15 r10 2.2k res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-222jpa15 r16 0 ohm res, 0402 kamaya, inc rmc1/16sjpth j1, j2, j3, j4 conn, sma, end lnch, univ, hyb mnt, flt heilind electronics per mat- 21 - 1038 p1 conn, hdr, st, plrzd, 8-pin itw pancon mpss100-8-c c3, c4, c11, c13 , c14, c1 7, c 18, c20, c22, c23, c26, c27, c30- c3 2, r4 -r 8, r11, r13- r15, l7, l9, l11, l13 dnp u1 dut qorvo RFVA0016 downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 14 of 20 www.qorvo.com ? evaluation board schematic C 2 62 0mhz to 2 690m hz application circuit downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 15 of 20 www.qorvo.com ? evaluation board bill of materials C 2620 mhz to 2690 mhz application circuit reference des. value description manuf. part number va0016410(a) ddi va0016410(a) c1, c2, c15 0.1uf cap, 10%, 16v, x7r, 0402 murata electronics grm155r71c104ka8 8d c24 100pf cap, 5%, 50v, c0g, 0402 murata electronics grm1555c1h101ja0 1d c5, c6, c8 1000pf cap, 10%, 50v, x7r, 0402 murata electronics grm155r71h102ka0 1d c7 , c25 10pf cap, 5%, 50v, c0g, 0402 murata electronics grm1555c1h100jz01 e c12, c28 100pf cap, 5%, 25v, c0g, 0201 murata electronics grm0335c1e101jd0 1d c1 0 1.4pf cap, +/-0.05pf, 25v, c0g, 0201 murata electronics grm0335c1e1r4wd 01d c9 1 pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e1r0bd0 1e c19 2.1pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e2r1bd0 1e c 21 2. 2 pf cap, +/-0.1pf, 25v, c0g, 0201 murata electronics grm0335c1e2r2bd0 1d l1 2 7nh ind, 5%, m/l, 0402 murata electronics lqg15hn27nj02d l2 0.9nh ind, +/ -0.1nh, t/f, hi-q, 0201 murata electronics lqp03tn0n9b02d l5 3.3nh ind, +/-0.1nh, t/f, hi-q, 0201 murata electronics lqp03tn3n3b02d l12 4.0pf cap, +/-0.05pf, 25v, c0g, 0201 murata electronics grm0335c1e4r0wd 01 r1 1.5k res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-152jpa15 r2 100 ohm res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-101jpa15 r6 0.2pf cap, +/-0.05pf, 25v, c0g, 0201 murata electronics grm0335c1er20wz 01d r3, r9, r12 , c29 0 ohm res, 0201 kamaya, inc rmc1/20jppa15 r10 2.2k res, 5%, 1/20w, 0201 kamaya, inc rmc1/20-222jpa15 r16 0 ohm res, 0402 kamaya, inc rmc1/16sjpth j1, j2, j3, j4 conn, sma, end lnch, univ, hyb mnt, flt heilind electronics per mat- 21 - 1038 p1 conn, hdr, st, plrzd, 8-pin itw pancon mpss100-8-c c3, c4, c11, c13 , c14, c16, c1 7, c 18, c20, c22, c23, c26, c27, c30- c3 2, r4 , r5, r7, r 8, r11, r13-r15, l7, l9, l11, l13 dnp u1 dut qorvo RFVA0016 downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 16 of 20 www.qorvo.com ? mode pin truth table mode min attenuation max attenuation low or 0v 0v 3.3v high or 5v 5v 0v pin names and description pin no. label description 1 gnd low inductive path to ground 2 vcc1 v cc supply 3 gnd low inductive path to ground 4 nc no connect 5 gnd low inductive path to ground 6 gnd low inductive path to ground 7 rfin rf input (externally matched to 50?) 8 gnd low inductive path to ground 9 nc no connect 10 gnd low inductive path to ground 11 gnd low inductive path to ground 12 nc no connect 13 gnd low inductive path to ground 14 gnd low inductive path to ground 15 gnd low inductive path to ground 16 is2_out interstage rf output to allow matching to last stage amplifier 17 gnd low inductive path to ground 18 gnd low inductive path to ground 19 gnd low inductive path to ground 20 gnd low inductive path to ground 21 is3_in interstage rf in to allow matching to last stage amplifier 22 gnd low inductive path to ground 23 gnd low inductive path to ground 24 rfout rf output (externally matched to 50?) 25 gnd low inductive path to ground 26 gnd low inductive path to ground 27 gnd low inductive path to ground 28 vcc3 supply voltage 29 vref2 reference voltage to set current of last stage device 30 vcc2 supply voltage 31 mode mode select pin to select positive or negative slope of the v ctrl voltage, see mode pin truth table. 32 vctrl voltage variable amplifier control voltage. downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 17 of 20 www.qorvo.com ? io pattern note: all other pins are grounded. package outline drawing downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 18 of 20 www.qorvo.com ? evaluation board assembly drawing note: tp1 and tp2 are test ports for interstage tuning. downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 19 of 20 www.qorvo.com ? branding diagram downloaded from: http:///
RFVA0016 analog controlled vga 400mhz to 2810mhz data sheet february 15, 2017 | subject to change without notice 20 of 20 www.qorvo.com ? handling precautions parameter rating standard caution! esd -sensitive device esd?C?human body model (hbm) class 1c esda?/?jedec js - 00 1- 20 14 esd?C?charged device model ( cd m) class c3 jedec jesd22-c101f msl?C?moisture sensitivity level level 3 ipc/jedec j-std- 020 solderability compatible with lead-free (260c max. reflow temp.) soldering process. solder profiles available upon request. contact plating: electrolytic niau rohs compliance this part is compliant with 2011/65/eu rohs directive (restrictions on the use of cert ain hazardous substances in electrical and electronic equipment) as amended by directive 2015/863/eu. this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product information, worl dwide sales and distribution locations: web: www.qorvo.com tel: 1- 844 -890-8163 email: customer.support@qorvo.com for technical questions and application information: email: appsupport@qorvo.com important notice the information contained herein is believed to be reli able; however, qorvo makes no warranties regarding the informa tion contained herein and assumes no responsibility or liability whatsoe ver for the use of the information contained herein. all infor mation contained herein is subject to change without notice. customers shoul d obtain and verify the latest relevant information before pl acing orders for qorvo products. the information contained herein or any u se of such information does not grant, explicitly or imp licitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. this information does not constitute a warranty with respect to the products described herein, and qorvo hereby disclaims any and all warranties with respect to such products whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, including the implied warranties of merchantability and fitness for a particular purpose. without limiting the generality of the foregoing, qorvo pro ducts are not warranted or authorized for use as critical compo nents in medical, life-saving, or life-sustaining applications, or other appl ications where a failure would reasonably be expected to cause severe personal injury or death. copyright 2017 ? qorvo, inc. | qorvo is a registered trademark of qorvo, in c. pb downloaded from: http:///

▲Up To Search▲

Price & Availability of RFVA0016

	To Download RFVA0016 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .